520 Series Connector system

• Utilises EDAC gold-plated, hermaphroditic, contacts producing ultra-reliable connection with four gas-tight mating surfaces. A top quality, yet highly cost-effective, interconnect product.
• Board mount or in-line contact tail options.
• Identical insulator for plug and receptacle enabling one part number to be ordered/stocked.
• 2 or 3 way options
• Clip available to neatly secure mated connector to panel when used in-line
• Contact rating 8.5A

Series 100 Contact Strips

• .100" (2.54mm) or .200" (5.08mm) Contact Spacing for Contacts on Strips
• Other Spacings accommodated with Loose Contacts
• Assemble onto .062" (1.57mm) or .125" (3.18mm) Nominal Thickness PC Board by Staking and/or Soldering of Contact Tails
• EDACON Hermaphroditic Contact Mating Design
• Card Guides, Guide Pins, Guide Sockets and Polarizing Sleeves to Ensure Correct Alignment and Mating available
• Handling and Assembly Simplified with Contacts on Strips
• Designed to Mate with 100 Series Contacts in Parallel or Perpendicular Board Configurations

Series 151 Pin Headers and Sockets

• Pin headers and sockets comprise of a wide range of industry standard headers for printed circuit board use
• High volume production capabilities result in flexible design solutions at competitive prices
• Enormous variety of pin header styles and types, as header posts can be:

• cut to any height and board depth
• plated with a wide variety of options
• bent to various angles
• polarized in any position
• cut to any number of positions.
• Headers also manufactured with a breakaway design that allows for each header to be easily broken into smaller units by the end user.
• Sockets have plating and termination options, including right angle bends and SMT contacts.
• Most products can be ordered in color for a small surcharge.

556 Series Board to Wire Connector System

• UL approved
• 3.96 contact spacing
• Plug and socket in 3, 4 or 6 pole versions
• Edacon hermaphroditic contact system
• Crimp, PC tail, wire hole or taper tail available
• Tools for contact assembly and removal available
  

Single IDC Contact
M00-018-001

• IDC Contact for SMT mounting
• 0.2 x 0.125 inch footprint (5.08 x 3.18mm)
  
• Accepts wires 18-20 AWG
• Phosphor Bronze
  
• Lead free tin plated over nickel
  

Mini-Latch Connectors
153

• Low cost for bulk requirements
  
• Stringent tolerances ensure reproducible latching performance
• Compatible to Molex 50-57-9403
  
• Suitable for automotive and industrial applications
• Crimp contacts on reels for automatic machines
  
• Proven contact performance
• 2.54mm pitch between contacts
• Rated 2.5 A 250VAC/DC
• Withstanding voltage 1000 VAC / minute
• Insulating resistance 1000 M? minimum
• Temperature range -40°C to +105°C
• Material PBT UL94V-0 black (other colors on request)
• Prewiring available to customer specification

Ordering information: